Tag Archives: Colorado

11/12/11 – My Opening Day of Colorado Pheasant Season

Ross and Pride Opening Day 2011
Ross and Pride Opening Day 2011

That alarm was set to go off at 3 a.m.  However, at 1:45 a.m. my eyes rocketed open in anticipation of the day ahead.  It was Saturday November 12th, and it was opening day of pheasant season in Colorado.  It was the first opening day of my life and I was fired up.  I had packed the truck the night before so a cup of coffee was the only thing I needed to grab as I headed out the door.  Pride, my eight year old lab, made his way back to his bed, obviously unaware of the adventure about to unfold.

I pulled into my buddy Jim’s house at about 4 a.m.  His engine was running and the truck’s headlights were pointing down the driveway.  I loaded up and were off to the selected Conservation Reserve Program (CRP) land in the northeast corner of the state.  Discussions during our two and one half hour drive focused on crafting the elements of our morning strategy.  Jim had selected a field that had proven to be productive for him in years past.   If no other hunters were present, we would start in the eastern end of a grass field that bumped up against a cut corn field.  The dogs would work the deep cover and we would walk the left and right seam hoping that escaping birds would flush to the edges of the draw.

The last ten miles of the drive slowed dramatically as a plethora of hunters in their own trucks lined the single lane road all heading to upland heaven.  The sun had started to rise and we could hear the faint crack of gunshots as we past large stretches of prime land.  I moved to the edge of the passenger seat as we took the final right to our field.  We passed a group of hunters stalking the land adjacent to our spot.  I stared enviously at them as they had already started their stalk.

Jim pulled off the dirt road and parked at the eastern end of the field.  The wind was blowing at about fifteen miles per hour directly into our faces.  We both jumped out of the car and started to get ready for action.  Amazingly, I could actually hear the roosters cackling in the field.  My breathing  and actions quickened, so I had to consciously control myself in fear I would miss something essential to my intended success.

When I let Pride out of the car he started to twirl with anticipation.  He smelled pheasant and was obviously ready to aggressively hit the field.  With my Beretta A400 Xplor Light in hand, I looked at Pride and muttered the command, “hunt it up”.  We all entered the field together, Jim and his dog Ella walking about fifty yards to my left.  Without warning, pheasants started to suddenly appear about 60 yards in front of me.  They flew right, left and of course away from the muzzle of my gun.  I carefully watched Pride as he tried to corner roosters running in every different direction in the deep grass.  It seemed that only hens got up next to me while the roosters took flight just outside of my range.  As feelings of desperation overcame me, Pride abruptly stopped on point about 40 yards to my left.  I made certain that Jim acknowledged my position and moved quickly to the spot.  Unfortunately the bird started to move and Pride flushed him.  I should have knocked him down with the first shell but my mount and swing were less than stellar.  Shot number two exploded two feet behind the bird and then I made a mistake; as the pheasant moved from three o’clock to five o’clock I attempted a “Hail Mary” shot.  With no shells remaining in the chamber of my Beretta, I uncoordinatedly reached into my vest for more Prairie Storm ammunition.  As I tried to reload, Pride went on point again.  Safety being my primary concern, I worked slowly to arm my weapon.  Too late!  The beautiful rooster took flight ten feet in front of me as I gripped an empty shotgun.

The field provided more action; Jim took down a fine bird on a long and effective shot.  Thanks to Pride’s diligence, I had my opportunities, but was definitely suffering from pheasant fever (I was choking).  We hunted that field for three hours then moved to other plots of public land.  The dogs raised plenty of hens as we walked through miles dense cover, but the action slowed as we approached midday.  Before we broke for lunch, we noticed a farmer on his John Deere combine cutting corn adjacent to the field that we were hunting.  Each pass he made toward our field forced multiple pheasants into the air.  We made the calculated decision to let the farmer finish his work so we could end the day on the bordering field.

I became increasingly anxious during lunch (I think I asked for the check as soon as we sat down).  There were opportunities to execute and I was failing myself and my dog.  After leaving the restaurant, Jim and I made our way down another dirt road, when suddenly two roosters flew over our truck moving from private to public land.  We stopped and quickly got ready to roll.  The temperature was now in the sixties and the wind was negligible.  We walked hundreds of yards through dense cover with minimal action.   Then, without warning, Pride made a hard stop and point about twenty yards to my left.  The bushes were so think that I could not see what he was looking at.  I moved slowly toward the dog.  He jumped left as the bird was obviously running in that direction.  Pride pushed the flush and the rooster took flight.  My first shot was solid, but I felt it necessary to fire again in order to ensure the bird went down.  Pride fetched my first Colorado wild rooster and brought him to my hand.  There are certain things in life that provide profound emotions.  At forty three, I have gained a new passion for wing hunting, and this moment was the culmination of almost three years of preparation.

To conclude opening day, Jim and I made our way back to the field where we had seen the farmer cutting his stalks of corn.  I was relaxed as the pressure of shooting my first bird was behind me.  The tactics we would utilize were obvious; walk toward the downed corn and force the birds into the open area.  It did not take long for us to see an abundance of hens and roosters taking flight in all different directions.  Two finely placed shots brought me to my pheasant limit (3).

The two and one half hour drive back to Parker had Jim and me reflecting on the day that had been.  The experience touched my soul and I was thankful for the opportunity to fulfill a dream.

Enhanced by Zemanta

Callibaetis = Filet Mignon for a Colorado Rainbow Trout

English: Rainbow trout
English: Rainbow trout (Photo credit: Wikipedia)

Callibaetis mayflies, among the largest in the Baetidae family, reside only in slow or still water. The most important species is Callibaetis ferrugineus, which is found across the country but produces its best hatches in the West.

On July 28th, I found out first hand and up close what a callibaetis hatch means to a Colorado rainbow trout – bon appétit.

After a prolonged hike through mosquito infested marsh land, my buddies and I arrived at a section of Spinney Mountain Reservoir that I had never fished.  The early morning cloud cover had burned off, and the temperature rose to an uncomfortable 85 degrees.   The air was still (rare for Spinney) so the water was like glass.  As we waded to the weed-line, backs of large rainbow trout began to emerge from the depths of the lake.  My heart was racing as we fanned out in order to cover the most water.  Waiting for any movement within casting distance, I began to strip fly line in anticipation of additional trout slurping.   My impatience forced me to cast my #12 grey flashback hare’s ear toward the middle of the lake.  Two slight twitches, then BANG, a 20 inch bow hit the fly and took instant air.  Three jumps later he sped laterally, stripping my fly line down to the backing.  The fight continued for about 10 minutes, ending in the netting of the fantastic fish.

The callibaetis hatch lasted over 2 hours, and the trout disappeared as fast as they arrived.  Between the three of us, we landed over 20 fish, all between 18 and 22 inches long.  What an amazing day in Colorado.

http://youtu.be/2b1UogBOZF0

Enhanced by Zemanta

A Golf Dream Becomes a Reality

ACE Colorado Golf Club Hole #6 001

As an obsessive, devoted golfer, there are certain things you dream about doing.

  • Breaking par (73 in 2009 is my best round – I choked on Pradera’s 18th hole)
  • Playing Pebble with your favorite golfing buddies (need to get this done – $500 is a little much but worth it)
  • Playing Ireland with your favorite golfing buddies (did this in 2001 – amazing time, must do it again)
  • Qualifying to play in a state amateur event (at this point I might humiliate myself)
  • Playing in a pro-am event with your favorite PGA professional (Steve Stricker for me)
  • Making an ACE (did this today – 5/31/10 – at Colorado Golf Club)

I have been fortunate to witness 3 hole-in-ones in my 20 years of playing golf.  Every ball was struck perfectly, and looked good right off the clubface (Scott Tynan’s sand wedge in Myrtle Beach, Victor Galvani’s 9 iron on Framingham Country Club’s 17th and Todd Curlett’s 6 iron on Framigham Country Club’s 11th).  As their ball melted inside the hole, I could barley control my excitement.  In fact, given my perfect form-tackle, I am surprised no one was ever seriously injured.

Today (May 31, 2010), I was invited to play in the post Senior PGA Championship event at Colorado Golf Club in Parker, Colorado.  My buddy, Brad Kellogg and I decided to play the course from 7,100 yards, and experience how the pro’s recently played the amazingly difficult layout.

The weather was perfect, 80 degrees with a subtle, but steadily growing, southwest wind.  My warm up could not have been better; everything felt in sync – unfortunately this usually means I will play terribly.  That said the day seemed to start out well.  On the 630 yard (par 5) first hole, I hit a nice drive down the left side.  After two good shots, I was left with a 35 foot put.  Unfortunately, it took me 4 putts to finish the hole – as a confident putter, this result was not what I had anticipated.  On the third hole the pin was tucked in the back right.  I hit a solid 8 iron approach shot (166 yards) downhill and downwind.  My ball hit the green on the left side, and rolled to the collection area about 40 feet to the left of the pin.  I decided to putt the ball as there was trouble just behind the pin. Unfortunately, I hammered my putt and ended up in a bunker from hell (to the right of the green).  Truthfully, I felt lucky walking away with a bogie after my poorly executed initial putt.  Holes 4 and 5 saw me make two more bogies even though I was hitting solid and accurate shots.

As I stepped to hole #6 (par 3, 200 yards), I could feel a slight breeze to my back.  Brad told me that the green rolled left (where the pin was), so I should target the right center as my landing area.  Brad chose a 6 iron, which means I committed to hitting my new TaylorMade Burner 5 iron.

I felt good standing over the ball (a rarity these days), and made a nice fluid swing (in my mind anyways).  The ball was hit high, with an evident and necessary draw.  Upon hitting the green, my ball moved left toward the pin.  I felt my heart race at it neared the cup.  Bingo, right in the jar!  I think I tackled Brad first yelling “I did it, I did it”.  I spun around (still yelling) and jumped on the two guys we were paired up with (Blaine and Casey).  I am certain my histrionics angered some of the other players on the course – truthfully, I really did not care.

Playing the rest of the round was difficult as I was still shaking three holes later.  I finished with an 85…respectable given the circumstances.

I will mount the ball, glove, scorecard and CGC flag later this week.  I am happy to say that one of my golf dreams became reality.

http://youtu.be/e7jIE4296wY

In the Market for a New Fly Rod & Reel?

I am a consumer that recognizes value, and appreciates great service.  As a new fly fisherman (but a veteran fisherman), I took significant time to research many of the reels, rods and terminal tackle available to me.  As a long time buyer of salt and fresh water products, I expected that quality equipment would cost me plenty.  That said, I did not expect that rods from Sage, Winston, G. Loomis and Orvis would start in the $350 range, and only head north from there.  Available reels from Tibor, Abel and Bauer also came at a high price ($300+).  The challenge for me was to find a rod/reel combination that allowed me to maximize results during my limited time on the water (and at a reasonable price).

My thorough investigation of the fly fishing equipment marketplace brought me to a Colorado based company called Elkhorn Fly Rod and Reel.  Historically, I have always supported local businesses that produce good products, and offer superior service.  The online reviews on Elkhorn equipment were very positive (and the price was right) so I purchased an Elkhorn Butler Series rod (5 weight), and armed it with an Elkhorn T2 reel.  Over the last 18 months, I have fished many rivers in Colorado and Wyoming; enjoying some of the best waters in the country.  The weather (snow, rain and wind) I have fished in has pushed me and my equipment to the limit.  Put to frequent tests, my Elkhorn rod/reel has performed extraordinarily well.  My Butler series rod allows me to quickly notice subtle strikes while nymphing.  The T-2’s (reel) drag system becomes noticeably relevant as a 22” rainbow rushes down stream with a small nymph clinging to the corner of her mouth.  I have been so impressed with Elkhorn products that I purchased 2 more reels (T-1 and MA-2) and the complementary rods (Traveler Series).

During my last trip to the North Platte River, I fell while trying to net a fish.  While I did eventually land the fish, I unfortunately dinged up my rod.  I asked Elkhorn to evaluate the rod, in order to determine if the structure remained sound.  Brian Chavet, the owner of Elkhorn, actually called me to discuss his findings after thoroughly testing the rod’s integrity.  It is that type of service (and expertise) that will keep me a long-time Elkhorn customer.

If you are in the market for a new setup, I suggest you evaluate the equipment from Elkhorn Fly Rod and Reel.

Reblog this post [with Zemanta]